Custom Z-Channel - 304 Stainless #8 Mirror | Stainless Supply

If you have a drawing that you would like us to see, then upload it here.

Select "Yes" then click the "Browse" button to find your drawing on your computer.

Once you've browsed for your drawing, click the "Submit" button to upload it to our servers.

Make sure the file is no larger than 5MB and should be one of these file formats: .jpg, .gif, .png, .pdf, .dwg, .dwf, .dxf, .sldrw, .igs, .step, .stp, skp, .dae.

Custom Z-Channel - 304 Stainless #8 Mirror

SSHBP - #8 Mirror

SSHBP - BA (Bright Annealed)

HPS - #8 Mirror

HPS - BA (Bright Annealed)

DS - #8 Mirror

DS - BA (Bright Annealed)

SG4 - #8 Mirror

SG4 - BA (Bright Annealed)

SG4 - #8 Mirror Beveled

SG4B - BA (Bright Annealed) Beveled

SG4TT - Two Tone

SBW - #8 Mirror

SBW - BA (Bright Annealed)

D3 - #8 Mirror

D3 - BA (Bright Annealed)

D3B - #8 Mirror Beveled

D3B - BA (Bright Annealed) Beveled

D4 - #8 Mirror

D4 - BA (Bright Annealed)

D4B - #8 Mirror Beveled

D4B - BA (Bright Annealed) Beveled

D6 - #8 Mirror

D6 - BA (Bright Annealed)

D6B - #8 Mirror Beveled

D6B - BA (Bright Annealed) Beveled

D6TT - Two Tone

D6TT - Two Tone

D12 - #8 Mirror

D12 - BA (Bright Annealed)

D12B - #8 Mirror Beveled

D12B - BA (Bright Annealed) Beveled

DT63 - #8 Mirror

DT63 - BA (Bright Annealed)

DT63B - #8 Mirror Beveled

DT63B - BA (Bright Annealed) Beveled

DT84 - #8 Mirror

DT84 - BA (Bright Annealed)

DT84B - #8 Mirror Beveled

DT84B - BA (Bright Annealed) Beveled

DT84TT - Two Tone

BW1 - #8 Mirror

BW1 - BA (Bright Annealed)

BW2 - #8 Mirror

BW2 - BA (Bright Annealed)

BW3 - #8 Mirror

BW3 - BA (Bright Annealed)

Custom Z-Channel - 304 Stainless #8 Mirror

Your Account  | 
Stainless Supply

Experts Available
(877) 484-0088
Stainless Supply



Custom Z-Channel - 304 Stainless #8 Mirror
Jump To Cost Calculator
Product Description
304 stainless steel custom Z-Channel #8 mirror has a non-directional finish that virtually looks like a mirror. 304 stainless steel custom Z-Channel #8 mirror possesses a highly polished finish and does not contain or have a coating or finishing material to give it reflectivity. 304 stainless steel custom Z-Channel #8 mirror comes with a double layer of PVC film to protect the mirror finish during fabrication and installation.

Unlike structural, extruded Z-Channel, our custom Z-Channel will be cut to your specifications and bent in a press break. Therefore, our custom Z-Channel will give customers more variety of fabrication options, including a wide range of bending angles, hemmed edges (on thinner gauge material), flange options, uneven leg sizes, etc.

On our custom Z-Channel made out of material with a finished side, Stainless Supply also offers the choice of which side the finish side is placed on the custom Z-Channel, which can be selected in Step 2 of the Cost Calculator. For #4 brushed finish, #8 mirror finish, and Bright Annealed (BA) finish stainless steel, the finished side will have a protective film on it to help prevent scratching until the product is delivered.

Currently, Stainless Supply can offer up to 120" (10 foot) lengths of custom Z-Channel. In terms of shipping, UPS and Fed-Ex ground will not take packages over 9 feet in length (including packaging). Therefore, anything over 96" (8 feet) will be rated as a freight shipment after adding it to the shopping cart and typically the shipping price will be higher than ground orders. If you have any questions about freight shipments, please call our office at 877-484-0088.

Cost Calculator

$250 Minimum
(mixing sizes is ok, total calculated in cart)
(Click here for thickness chart)
(Click here for radius information)

STEP 2: Design Your Profile

Step 2: Design Your Profile
These measurements represent: Dimension
Whole #
Whole #
Whole #
Angle 1:      
Angle 2:      

Finish Side Preference?
(Choose which side of the z-channel will show the "good side" of the metal)

Edge Options:

None Hemming Flanges
Hem Angle 1:
Hem Angle 2:
Flange Angle 1:

Flange Angle 2:


Flange Width (Inches):  

(Holes, key-holes or slots are an option on flanges. Please contact us for a quote or placing an order with these options.)

  Rounded Corners:

     No Yes
    (Click here for more information.)

STEP 3: Custom Or Standard Length

Step 3: Custom Or Standard
  Custom Length
  Standard Length
Click Here for Wholesale Pricing Information


11 - 50 10% Discount
51+ 20% Discount
Would you like to receive a scaled measured drawing for approval before we fabricate?

(This option may add more time, typically 1-2 days after your approval)

(Some complicated jobs require approval prior to fabrication)


For standard or shear cut to size orders, typical lead time is 6 days.
For laser orders, typical lead time is 11 days.

We can expedite these orders for an additional charge if the option is selected in your shopping cart. If you have a critical lead time, please feel free to call and place your order via phone: (877) 484-0088

All shear cuts are guaranteed to be ± 1/16".
All laser cuts are guaranteed to be ± 1/64".
Please note that cuts less than a whole inch will be priced at the next full inch price.

A custom angle setup charge of $27 per thickness will be applied in your cart.


Quote Request
File Upload

Click here to submit your request.
Privacy  |  Terms  |  Shipping  |  Returns  |  Contact
©2024 Stainless Supply. All Rights Reserved.