4" Stainless Steel Beveled Embossed Diamond Quilted Pattern
rollover to enlarge
Cost Calculator >>
Order Samples >>
Description
D4B is a variation on our most common pattern, D4 fine line, which is an improvement to the common "quilted pattern". Stainless Supply's design is based on a 2.82" square dimension instead of the common 3". This causes the point to point dimension to be an even 4", allowing the diamonds to be full on all edges of a full 4' x 10' or 4' x 8' sheet. In contrast, the common 3" design will not line up on full sheets and not give a seamless transition to full sheets installed next to each other. Using our trim molding, the pattern on full sheets of quilted stainless steel will appear to run continuously.
This is made out of your choice of 22 gauge or 24 gauge stainless steel sheet metal. It comes with a PVC film on one side to help protect against scratching during fabrication and installation.
If you need any fabrication (hemming, rounded corners), you must select the "cut to your size" option and not "stock sheets".
Stainless Supply is the manufacturer and source of embossed stainless steel. We produce our patterns in a high precision machine offering a high quality and more pronounced pattern depth compared to many other manufacturers.
Unless specified, Stainless Supply centers the embossed patterns on custom and cut to size pieces. If you need help with ordering, have a large project that needs quoted, or have any questions, do not hesitate to call us at 877-484-0088.
+ Read Description
Our beveled style provides a unique option to the more traditional fine line style. The beveled emboss has wide V shaped lines (9/16" wide) compared to the fine line emboss which has narrow (1/16") U shaped lines. The fine line and beveled patterns are both the same depth.
D4B is a variation on our most common pattern, D4 fine line, which is an improvement to the common "quilted pattern". Stainless Supply's design is based on a 2.82" square dimension instead of the common 3". This causes the point to point dimension to be an even 4", allowing the diamonds to be full on all edges of a full 4' x 10' or 4' x 8' sheet. In contrast, the common 3" design will not line up on full sheets and not give a seamless transition to full sheets installed next to each other. Using our trim molding, the pattern on full sheets of quilted stainless steel will appear to run continuously.
This is made out of your choice of 22 gauge or 24 gauge stainless steel sheet metal. It comes with a PVC film on one side to help protect against scratching during fabrication and installation.
If you need any fabrication (hemming, rounded corners), you must select the "cut to your size" option and not "stock sheets".
Stainless Supply is the manufacturer and source of embossed stainless steel. We produce our patterns in a high precision machine offering a high quality and more pronounced pattern depth compared to many other manufacturers.
Unless specified, Stainless Supply centers the embossed patterns on custom and cut to size pieces. If you need help with ordering, have a large project that needs quoted, or have any questions, do not hesitate to call us at 877-484-0088.
Quick Request
Need something different?Can't find what you're looking for?
Click here to submit your request.
<< Back
Cost Calculator
$250 Minimum(mixing sizes is ok, total calculated in cart)