3" Stainless Steel Beveled Embossed Diamond Pattern
rollover to enlarge
Cost Calculator >>
Order Samples >>
Description
The smallest option of our standard sizes, the diamonds measure 3" from point to point (on the center of the beveled line) and are a 2.12" square. When using full sheets and using our trim molding to connect the sheets, our modular design will allow the patterns on connecting sheets to line up perfectly. This is not a 3" square that is sometimes referred to as 3QLT or 3" quilted. If you need that option, our closest modular option is D4.
This is made out of your choice of 22 gauge or 24 gauge stainless steel sheet metal. It comes with a PVC film on one side to help protect against scratching during fabrication and installation.
If you need any fabrication (hemming, rounded corners), you must select the "cut to your size" option.
Stainless Supply is the manufacturer and source of embossed stainless steel. We produce our patterns in a high precision machine offering a high quality and more pronounced pattern depth compared to many other manufacturers.
Unless specified, Stainless Supply centers the embossed patterns on custom and cut to size pieces. If you need help with ordering, have a large project that needs quoted, or have any questions, do not hesitate to call us at 877-484-0088.
+ Read Description
Our beveled style provides a unique option to the more traditional fine line style. The beveled emboss has wide V shaped lines (9/16" wide) compared to the fine line emboss which has narrow (1/16") U shaped lines. The fine line and beveled patterns are both the same depth.
The smallest option of our standard sizes, the diamonds measure 3" from point to point (on the center of the beveled line) and are a 2.12" square. When using full sheets and using our trim molding to connect the sheets, our modular design will allow the patterns on connecting sheets to line up perfectly. This is not a 3" square that is sometimes referred to as 3QLT or 3" quilted. If you need that option, our closest modular option is D4.
This is made out of your choice of 22 gauge or 24 gauge stainless steel sheet metal. It comes with a PVC film on one side to help protect against scratching during fabrication and installation.
If you need any fabrication (hemming, rounded corners), you must select the "cut to your size" option.
Stainless Supply is the manufacturer and source of embossed stainless steel. We produce our patterns in a high precision machine offering a high quality and more pronounced pattern depth compared to many other manufacturers.
Unless specified, Stainless Supply centers the embossed patterns on custom and cut to size pieces. If you need help with ordering, have a large project that needs quoted, or have any questions, do not hesitate to call us at 877-484-0088.
Quick Request
Need something different?Can't find what you're looking for?
Click here to submit your request.
<< Back
Cost Calculator
$250 Minimum(mixing sizes is ok, total calculated in cart)