HEMMED SIDES


  • Hemming is a fabrication option used to keep the outside edges of the sheet from being sharp.
  • The hems will give the edges a finished appearance.
  • The hems will add a degree of rigidity to the sheet.
  • Hemming can be done on sheets up to 22 gauge stainless steel.
  • Hemmed sheets can still have sharp corners, which can be prevented with the round corner option.
  • When you enter the size dimensions of the piece, that will be the "finished" size. We will compensate the extra material for the hem.
  • Hemmed edges are not sharp, they can be touched with the bare hand with very little to no risk of being cut.

 

HEMMED EDGE:
304 Stainless, 24 Gauge #4 Polish Finish with hemmed edges.


HEMMED EDGE (BACK):
304 Stainless, 24 Gauge #4 Polish Finish with hemmed edges looking at the back.


REGULAR CUT EDGE:
304 Stainless, 24 Gauge #4 Polish Finish with regular cut edging.