If you have a drawing that you would like us to see, then upload it here.

Select "Yes" then click the "Browse" button to find your drawing on your computer.

Once you've browsed for your drawing, click the "Submit" button to upload it to our servers.

Make sure the file is no larger than 5MB and should be one of these file formats: .jpg, .gif, .png, .pdf, .dwg, .dwf, .dxf, .sldrw, .igs, .step, .stp, skp, .dae.

Copper Expanded Metal

SSHBP - #8 Mirror

SSHBP - BA (Bright Annealed)

HPS - #8 Mirror

HPS - BA (Bright Annealed)

DS - #8 Mirror

DS - BA (Bright Annealed)

SG4 - #8 Mirror

SG4 - BA (Bright Annealed)

SG4 - #8 Mirror Beveled

SG4B - BA (Bright Annealed) Beveled

SG4TT - Two Tone

SBW - #8 Mirror

SBW - BA (Bright Annealed)

D3 - #8 Mirror

D3 - BA (Bright Annealed)

D3B - #8 Mirror Beveled

D3B - BA (Bright Annealed) Beveled

D4 - #8 Mirror

D4 - BA (Bright Annealed)

D4B - #8 Mirror Beveled

D4B - BA (Bright Annealed) Beveled

D6 - #8 Mirror

D6 - BA (Bright Annealed)

D6B - #8 Mirror Beveled

D6B - BA (Bright Annealed) Beveled

D6TT - Two Tone

D12 - #8 Mirror

D12 - BA (Bright Annealed)

D12B - #8 Mirror Beveled

D12B - BA (Bright Annealed) Beveled

DT63 - #8 Mirror

DT63 - BA (Bright Annealed)

DT63B - #8 Mirror Beveled

DT63B - BA (Bright Annealed) Beveled

DT84 - #8 Mirror

DT84 - BA (Bright Annealed)

DT84B - #8 Mirror Beveled

DT84B - BA (Bright Annealed) Beveled

DT84TT - Two Tone

BW1 - #8 Mirror

BW1 - BA (Bright Annealed)

BW2 - #8 Mirror

BW2 - BA (Bright Annealed)

BW3 - #8 Mirror

BW3 - BA (Bright Annealed)

Copper Expanded Metal

18G, 3/4

18G, 3/4

Copper Expanded Metal

rollover to enlarge

18G, 3/4

18G, 3/4


Copper expanded metal comes from 0.050" thick copper sheet that is expanded. We stock copper expanded metal in 300 to 500 foot coils. Copper expanded metal is thin enough to be rolled by hand and pieces measuring over 4' in length will typically be rolled up for shipping purposes.

With our copper expanded metal the long way of the diamond runs along the width. We can typically cut pieces that are 10' or shorter to size along the width, but you will need to call a sales representative at 877-484-0088 to discuss that option.

The copper expanded metal openings measure as follows:

3/4" Mesh
Short way of diamond opening = ~ 3/4"
Long of diamond opening = ~ 1 3/4"

5/8" Mesh
Short way of diamond opening = ~ 1/2"
Long of diamond opening = ~1 1/8"

Copper expanded metal is typically used for chimney caps, animal guards, and other projects that are decorative, where conductivity is needed, or that requires a long lasting, anti-corrosive metal. Copper expanded metal would not be recommended for uses in grills, trailers, catwalks etc. since it isn't strong enough for those applications.

Copper expanded metal is very corrosion resistant but will develop a patina on the outer surface if it is exposed to outdoor elements, which will act as a barrier to the metal directly beneath it. The patina on copper expanded metal can occur naturally or be induced by chemicals, and can range in many different colors, with brown being the most common. Copper expanded metal is very easy to bend and solder.

In stock! Order now!

Quick Request

Need something different?
Can't find what you're looking for?

Click here to submit your request.

Cost Calculator

Step 3: Select Length
Feet Inches Fractions

All cuts are guaranteed to be +.125" -0" (+1/8" -0")
Please note that cuts less than a whole inch will be priced at the next full inch price.